Varex Imaging (as Varian Medical Systems) was the first company in the world to deliver amorphous silicon flat-panel detectors capable of both fluoroscopic and radiographic digital imaging. Varex’s X-ray flat panel detectors for digital radiography work by converting the X-rays that strike its surface into light, and then turning the light into electronic data that a computer can display as a high-quality digital image.

Our flat panel detectors combine the best in amorphous silicon sensor panels, radiation-converting materials, low-noise analog and high-speed digital electronics, custom ASIC control and processing electronics, and compact packaging.

Varex also offers CMOS flat panel X-ray detectors. These detectors employ an innovative CMOS sensor design to provide a new level of performance and reliability for X-ray systems used in mammography, fluoroscopy, cone beam CT, and projection radiography markets in medical and dental. Its major advantages are high frame rates, low noise, high reliability, no image lag, and high spatial resolution. Clinical benefits in medical applications include lower radiation dose to the patient without compromising image quality. CMOS Detectors are more flexible, more stable, more sensitive, and faster than TFT-based flat panel detectors while producing higher resolution images.

Products

Displaying results for Dental Detectors

Product Technology Panel Size Pixel Matrix Pixel Size µm Energy Range (kV) Scintillator Type
1308DX Dynamic
13 x 8 cm

1024 x 640
512 x 320

127
40 - 160 kVp DRZ+, CsI
1313DX Dynamic
13 x 13 cm
1024 x 1024
512 x 512
127
40 - 160 kVp DRZ+, CsI
1313DXT Dynamic
13 x 13 cm

1024 x 1024
512 x 512

127
40 - 160 kVp DRZ+, CsI
1508 DXT Dynamic
15 x 8 cm
1152 x 630
576 x 320
127
40 - 160 kVp DRZ+, CsI
1515DXT Dynamic
15 x 15 cm

1152 x 1152
576 x 576

127
40 - 160 kVp DRZ+, CsI
2520DX Dynamic
25 x 20 cm

1536 x 1920
768 x 960

127
40 - 160 kVp DRZ+, CsI
2530C Radiographic
25 x 30 cm

1792 x 2176

139
40 - 160 kVp DRZ+
2530DX Dynamic
25 x 30 cm

1792 x 2176
896 x 1088

139
40 - 160 kVp DRZ+, CsI
1616DXT Dynamic
16 x 16 cm

1280 x 1280
640 x 640

127
40 - 150 DRZ+, CsI
4030DX Dynamic
40 x 30 cm

2048 x 1536
1024 x 768

194
CsI

System manufacturers are responsible for qualifying and validating their products for their intended uses and meeting all applicable requirements.

Product Inquiry: Medical Flat Panel Detectors

If you have a flat panel service request, proceed to the Flat Panel service report form and provide the requested information.

If you have a tube warranty/product return, please fill out the X-Ray Tubes Housing & Warranty form.

This report is to be submitted on each Flat Panel removed from service. Each flat panel must be returned with a completed Service Report describing the reason for return, operating conditions with install and remove dates in order to receive warranty consideration.

Before an RMA # can be issued on “Out Of Warranty Returns” a PO for $1,000.00 needs to be supplied at time an RMA# is requested. Note: All products must be cleaned of blood, contrast media or body fluids before returning.

Please fill out this form completely and hit submit. We will then email you further instructions along with an RMA number. Please do not ship any material to us without an RMA number; we will not be able to accept it.

Please Return within 90 days of RMA# Issued. After 90 days, RMA# will be closed and you will need to request a new RMA# to return your product.

Once you have received your RMA, please ship material to:

VAREX IMAGING CORPORATION
1678 Pioneer Road
Salt Lake City, UT 84104-4298
Receiving Door #15

PLEASE SHOW THE RMA# ON THE OUTSIDE OF ALL PACKAGING

All fields with an * are required


Contact Information


Product Information


Defect Information

Fill out information below as completely as possible.

How long has the system been operating before you see the defect?

Please describe the system set-up at the time of the failure:

Settings

kV

mAs