Our flat panel detectors are designed to meet a broad spectrum of imaging applications in the industrial and security industries. Varex flat panel detectors prevent geometric distortion and minimize effects of magnetic field and radiation. The technology found in our detectors allows our customers to take full advantage of superior digital image quality along with high throughput, as well as CT capabilities. These detectors present a uniform, undistorted, high-resolution image throughout the field of view, enabling technicians to take images of the internal structures of objects such as electronic circuits and mechanical parts.

Products

Displaying results for Material Science Detectors

Product Panel Size Pixel Matrix Pixel Size µm Energy Range (kV) Scintillator Type
1207N
12 x 7 cm

1536 × 864

74.8
12 - 160 kV Gadox or CsI:Tl
XRD 1621 xN ES
41 x 41 cm

2048 × 2048

200
40 kV – 15 MV (XRD 1621 AN ES)
20 kV – 15 MV (XRD 1621 CN ES)
Direct deposit CsI or Gadox
XRD 4343CT
43 x 43 cm

2880 × 2880

150
20 - 225 kV Direct deposition CsI:Tl and Gadox
XRD 3025
30 x 25

3008 x 2512

100
20 - 225 kV (G-22)
20 - 450 kV (G-45)
Gadox or CsI:Tl

System manufacturers are responsible for qualifying and validating their products for their intended uses and meeting all applicable requirements.

Product Inquiry: Security & Industrial Flat Panel Detectors

If you have a flat panel service request, proceed to the Flat Panel service report form and provide the requested information.

If you have a tube warranty/product return, please fill out the X-Ray Tubes Housing & Warranty form.

This report is to be submitted on each Flat Panel removed from service. Each flat panel must be returned with a completed Service Report describing the reason for return, operating conditions with install and remove dates in order to receive warranty consideration.

Before an RMA # can be issued on “Out Of Warranty Returns” a PO for $1,000.00 needs to be supplied at time an RMA# is requested. Note: All products must be cleaned of blood, contrast media or body fluids before returning.

Please fill out this form completely and hit submit. We will then email you further instructions along with an RMA number. Please do not ship any material to us without an RMA number; we will not be able to accept it.

Please Return within 90 days of RMA# Issued. After 90 days, RMA# will be closed and you will need to request a new RMA# to return your product.

Once you have received your RMA, please ship material to:

VAREX IMAGING CORPORATION
1678 Pioneer Road
Salt Lake City, UT 84104-4298
Receiving Door #15

PLEASE SHOW THE RMA# ON THE OUTSIDE OF ALL PACKAGING

All fields with an * are required


Contact Information


Product Information


Defect Information

Fill out information below as completely as possible.

How long has the system been operating before you see the defect?

Please describe the system set-up at the time of the failure:

Settings

kV

mAs